INTEGRITY® Manual Controls

INTEGRITY® AirMasseur® Controls

BLOWER & CONTROL SYSTEM
Jason's Integrity® AirMasseur® system includes a quiet 1 HP, variable speed blower with an automatic air heater, electronic control with a 20-minute timer and automatic purge and dry cycle, and a bather friendly air switch activated control button.

BLOWER ON/OFF, SPEED AND SPEED CONTROL
All Jason Integrity® air baths are provided with an air switch conveniently located for bather operation. This switch controls both the On/Off and blower speed functions. To start and stop the air blower, simply momentarily press and release the air switch button. The blower will always start at its highest speed. Once the blower is On, to decrease or increase air output, depress and hold the control button down until the desired setting is reached, then release.

AUTOMATIC PURGE CYCLE
Fifteen (15) minutes after being stopped, the air blower will automatically start for two (2) minutes to purge and dry the air channel.

AUTOMATIC HEATER
The air heater incorporated in the air blower will automatically operate when the blower is On to help maintain the temperature of the bath water.

INTEGRITY® Whirlpool Controls

PUMP & CONTROL SYSTEM
Jason's Integrity® Whirlpool system includes a quiet 1 HP, single speed pump motor, and a bather-friendly air switch activated control button.

PUMP ON / OFF WHIRLPOOL CONTROL
All Jason Integrity® Whirlpool baths are provided with an air switch conveniently located for the bather operation. This air switch controls the pump On/Off functions. To start and stop the whirlpool pump, simply momentarily press and release the air switch button.