Premier AirMasseur^®

The Premier Edition Digital Touchpad mounted on the bath features an LCD readout which alternately indicates the water temperature (+/-5°F) and time remaining. The control keypad features several icons used by the bather to control the bath. This section will outline the functions of the system when a particular icon is pressed. The system also features a water level sensor to prevent equipment from operating without the proper amount of water, an automatic diagnostic system to help with setup and troubleshooting, enhanced user controls, well as the Jason Bluetooth Sound Immersion System that will provide sound from your choice of Bluetooth device through the shell of the bath.

Unless otherwise indicated, an ON/OFF function will take place with a single press on the button icon. Some functions may require the use of a long press. A built-in timer shuts off the therapy equipment twenty (20) minutes after being activated.

HOME Icon:
The HOME icon will activate the keypad. From Standby mode, once pressed, the display will show the splash screen and then the available therapy choices. While equipment is running, pressing the HOME icon will return to the MAIN STATUS Screen. Press and hold for two (2) seconds to turn off all equipment and return to Standby Mode.

LED Icon:
The LED icon will operate the Chromatherapy Mood Lighting system. The LED system will operate for 2 hours before turning OFF. A first press of the icon will show the current LED status, color and time remaining. Subsequent presses will progress the light to the next mode or color. Press and hold the icon to cycle through the FADE mode, release the icon to choose any custom color. This will set the chosen color as the CUSTOM color option. Order of Colors: Off, Slow Fade, Stepping, Purple, Green, Red, Blue, Orange, White, and Custom.

AIRMASSEUR Icon:
The AIRMASSEUR icon is used to activate the blower and the 20-minute timer. CONSTANT Mode will start with the first press and pressing the icon again will shut off the blower. Once the system returns to Standby mode, the display will indicate a dry cycle purge countdown. After twenty (20) minutes, the blower will turn on for two (2) minutes to allow the air channel to dry. This purge cycle can be canceled by selecting the CANCEL button.

BLOWER MODE Icon:
The BLOWER MODE icon is used to change performance modes once the blower is ON. WAVE Mode will start with the first press, indicated by the blower speed rising and lowering in a wave fashion. PULSE Mode will start with the next press, indicated by the blower speed rising and lowering in an on/off fashion. CONSTANT Mode will return with the next press of the icon button.

BLOWER SPEED Icon:
The BLOWER SPEED icon is used to increase or decrease the blower speed once the blower is ON. Press to enter into the blower speed menu. Press and hold the - icon to decrease the blower speed until the desired intensity is reached. Press and hold the + icon to increase the blower speed until the desired intensity is reached. Press the button once to change the speed by one, Press and hold to increase the speed change increments. The blower will recall the chosen speed on any mode change but will reset to full speed after the system is powered off.